Guitar Self Tuning
Whether you are playing a show or just practicing, you should tune your acoustic guitar every time you play. Playing an out of tune guitar is not fun. Beginners can become frustrated with learning because they do not understand the importance of acoustic guitar tuning. The few extra minutes it takes to tune your guitar is always worth it.
It’s best to use an electronic tuner for acoustic guitar tuning. Sit down with the electronic tuner on a nearby table or stool. Turn it on and strum the first string. The tuner will sense which string is being tuned using its built in microphone. The indicator will show you how close you are to the correct pitch. It will also show you whether you are sharp or flat. Turn the tuning key and tweak the string until your tuner shows that you’re in tune.
Keep in mind that one always tunes up, which means going from looser to tighter till it’s in tune. If it becomes too tight, don’t just unwind it a little bit to try to improve it (called “tuning down”). It works far better to give the string some play and then start tightening it again till it’s right. When you tune up, not only are your results more accurate, but you also help the string hold its tuning longer.
A reference pitch source is needed whether or not you want to use an electric tuner when learning how to tune your guitar. Some options as to other things you can use are a tuning fork, another in tune guitar, a piano, or an MP3 that you know is in tune. Your results will always be accurate if you use an electric tuner when acoustic guitar tuning. If you’d like to try it the old fashioned way, an electric tuner will be helpful if you’d like to check your results.
The sixth, or E string is the place to start acoustic guitar tuning. Be sure to tune it to the reference pitch, and after you have it tuned, the other five strings can be tuned to that note. Simply follow the tune. There is a lengthy reason for how and why this works, but it’s not necessary to know how a car works to drive it. Under that same theory, extensive musical knowledge isn’t required in order to perform acoustic guitar tuning.
Then proceed with your acoustic guitar tuning as follows: 1. After verifying the guitar is in tune, play it on the fifth fret. Use that as a basis to tune the open fifth string. 2. Using the fifth string as a guideline, play the fifth fret on that to tune your fourth string. 3. Use the fifth fret on the fourth string to tune the third. 4. Pay close attention here, because there’s a bit of a change. The third string should be played using the fourth fret to tune the open second string. 5. Changing it up again- return to playing the fifth fret, only using the second string this time, to tune the first string.
If you’re just starting out with acoustic guitar tuning, you may want to ask someone at the music store when you purchased your guitar to show you how to do acoustic guitar tuning the proper way. Then just keep practicing until you’re comfortable with the process. It takes time and practice to learn to do acoustic guitar tuning, especially by ear. For the novice, the simplest way to perform acoustic guitar tuning is with the use of an electronic tuner. You can find one for around $20 and you will definitely get your money’s worth. An electronic tuner that is made specifically for tuning guitars has the ability to recognize which string is being played.

Discussion Area - Leave a Comment
You must be logged in to post a comment.