The Easiest Way To Spray Paint Your Car – Spray Painting
If you genuinely think that you want to paint a car then get ready for a full task ahead of you. It does not mean that you can’t or should not do it, it just signifies be sure you are ready to see the job done from beginning to end. If you dont finish the job completely or the right way then you are going to be driving something that would be a bit embarrassing to the eye at least.
To paint a car takes careful planning and ensuring that you have all of the supplies you need and the time to go through at least a couple of the stages.
There’re things that you are going to need by way of supplies. You will need masking tape, dust mask, goggles, sandpaper, wax/grease remover, primer paint, paper for covering, car wash and detergent, paint sprayer, putty with knife.
When you buy your sand-paper be sure you purchase fine and thick grit, as you would need both textures. The amount of primer and urethane based paint you require will be dependant on the size of your vehicle. Whether you want to utilise a paint sprayer is completely your choice, say you choose not to then the regular spray paint cans would do fine. Make sure you wear appropriate clothing when you go to paint a car so your skin isn’t exposed.
Ultimately be sure youve the right space to work in. You need to be able to work around your car. You most surely need good ventilation, and you will need to be able to protect it against the elements.
First off you must actually wash your car well. It doesn’t matter how clean it will look to you unless you just washed it, there’ll be whatever debris on it that you must remove, otherwise the paint will not adhere properly. Then once youve it washed nice and clean youve to get every of the old wax off it so that’s where the wax/greaser remover comes in. It’s really crucial you go through these steps when you go to paint a car.
You’ll in all likelihood notice that you have a couple of rough spots on your latest finish. Say you go to paint a car that is in this condition, you’ll not get good coverage with the new paint. Put little pit marks caused by stones or things like that just use a little putty to fill them in. The use the sand paper to gently smooth the rough spots and small holes. Make sure you rub out all the debris from sanding.
In order to paint a car, you must be absolutely certain that it is dry after your washing. This’ll take a few hours. Be certain it does not get dirty once more. Next masking tape off the areas that you dont want to get paint on.
Totally prime the car. Then sand it lightly once more. Be certain to wipe the residue off.
Now youre ready to apply the base coat of the new colour. Preferably with a spray gun. Completely spray it and then let it dry for about 15 minutes. And then you could apply the second coat. Most often you can get away with two coats.
Let it dry for about 1 hour then you can apply the clear coat. Let dry fifteen minutes then re apply. You will probably need about 3 coats of the clear to get a good finish.
Discussion Area - Leave a Comment
You must be logged in to post a comment.