Spray Painting Secrets – How To Paint A Car Easily
With money being tight now, perhaps the answer to giving your car a different look will be to indulge in various car spray painting. If the mechanics of it are in good shape, but the body is not really hot, then painting it will be the ideal solution.
It is a remarkable money-saver, but even more so if you do it yourself as opposed to getting it professionally done. You can do it if you read the basics and follow the instructions for car spray painting. Its important though if you decide you are going to take on this project that youre ready to see it through till the end.
The supplies you require are :
-coverings to protect the unpainted areas and masking tape to hold these in place -a good car wash detergent and brush and also a wax/grease remover. -various grits of sandpaper -primers and paint thats urethane base for the car spray painting -paint sprayer -safety equipment like masks, goggles and protective clothing -knife and putty for fill ins.
One : You must be sure that you wash the car thoroughly to take out all grime and debris. If you do not then these things would be set in with your paint, giving a very daunting look to the completed job. Follow up with a wax/grease remover so the paint you use for the car spray painting will adhere properly.
2 : Remove whatever rough spots by sanding. Once this has been done be sure to rinse off whatsoever of the loose sandings. This is where you’ll want to utilise the putty to fill in any minor pit marks, that’re have been caused from stones for illustration.
Three : Do not get in too much of a hurry to start your car spray painting. The car must be wholly dry so it’s best to leave it to do so for several hours. You can go ahead and cover whatsoever of the areas that your do not want to get paint on.
Four : At present you are ready to set out with the primer. Don’t skip this step, as it will give a much better look to the finished project. It helps the paint to adhere properly and provides for a more even finish. Next, once the primer is dry you’ll need to gently sand it down.
Five : You’re finally at the step you’ve been waiting for. Its time to apply the color for your car spray painting. Whether youve preferred to use aerosol paints or a spray gun, the premise stays the same. Merely apply thin coats. Several will likely be required. A Few light coats are much better than one thick coat. You’ll be able to tell just by looking at the car how many more coats of paint it’ll need. Numerous will just require two where as a few others might require three or 4.
6 : Ultimately, down to the last step and thats applying the clear coat. This’s done exactly the same as the colored coats.
Now you could clean up, take a step back and look up to the masterpiece you’ve created.
Discussion Area - Leave a Comment
You must be logged in to post a comment.